EGE Flow Sensors


Standard Sensor · Series 400

Sensors for use in non-hazardous areas
  • Flow and level control
  • Adjustable above and below set-point
  • Flow failure monitoring
  • For mounting in pipes and tanks
flow sensors - non-hazardous

Standard probes are manufactured in either 303 or 316 grade stainless steel. They can be
 supplied with fixed cables or with a quick disconnect type plug. The sensors can be
 mounted up to 100m away from the control amplifier. A sealing gasket is supplied, or
 alternatively, PTFE tape can be used. Mediums can be monitored with temperatures from
 -20 - +80'C although versions are available for temperatures of up to 120'C. Standard
 sensors are supplied with either 1/4", 1/2" or 3/4" BSP sizes. Short versions are available
 for direct mounting into "T" pieces. All of the standard range are pressure tight up to 100

flow sensors

Technical Data

Setting range
Water (nominal flow) 1...100 cm/s (20 cm/s)
Oil (nominal flow) 3...200 cm/s (60 cm/s)
Air (nominal flow) 2...20 m/s (4 m/s)
Temperature range -20...70°C
Temperature gradient 250°C/min 
Thermal shock time typ. 12 s
Standby time typ. 8 s (2...18 s)
On transition time typ. 2 s (1...13 s)
Off transition time typ. 2 s (1...15 s)
Protection (DIN 40050)
Cable IP 68
Plug version IP 67
Material sensor (DIN 17440) Stainless steel AISI-316 Ti
Tightening torque thread 100 Nm
Connection cable version 2m PUR blue / 4 x 0.25 mm²
Connection plug version Universal plug

flow sensors

Code: BK=black BN=brown BU=blue GN=green YE=Yellow GY=grey PK=pink WH=white

For further information please contract LPC

[Return to EGE Flow Sensors]   [LPC Home Page]

Crouzet | Seeka-Takex | Proximity Sensors | Brad Harrison | Siemens | Ege I Omron I Erwin Sick I Contrinex

Home I Suppliers I Price & Availabilty I Newsletters I Sensor Sourcing I Special Offers I Site Map I Links I Contact