Takex (Seeka-Takex)

Check out our Special Offers on Takex Sensors

At LPC we stock the extensive range of Takex (Seeka-Takex) of sensors - sensors which are renowned for their durability and reliability. The range covers a broad range of applications - so whatever your application or whatever the environment there is sure to be a Takex sensor that will be suitable to the task - contact us if you need assistance in selecting the right sensor for your application.

NA Series Industrial
DL-S Series
J Series Industrial
CX Series M18 Barrel Type DC
CX Series M18 Barrel Type AC
Mini G Series
Midi G Series
UM-Series
Mini-DL Series
F1 Series Fibre Optic Amplifier
F1 Series High Speed, High Power, Analogue
F2 Series Fibre Optic Amplifier
F10- "Touch to Teach" Fibre Amplifier
MC-Series
MA-Series Colour Mark Sensor
CS-C3 Colour Sensor
CS-D3 Series Colour Sensor
SST800 Series "Cross Ray" Sensors
SS-20 Series – Wide Sensor
Sensor Power Supply PS3
F70 Series Fibre Optic Amplifier
F71 Series Fibre Optic Amplifier
NE Series
NE-DC Series
DLS100R / DLS202
NESMT1 Transparent Bottle Detection
LT/LD Laser Sensor

Takex (Seeka) NA Series Industrial OpticalSensor

NA Series Industrial

Compact Housing
Retro reflective uses polarised light
Multivoltage 24 – 240 Vac/dc
Large screw terminals
Optional connector adaptor
SPST Output Relay
Multifunction timer (F-versions)
Housing sealed to IP66

TECHNICAL SPECIFICATION
Type	NAT20R/NAT20RF	NAM7R/NAM7RF	NAR10/NAR10F
Function	Throughbeam	Retro-Reflective with polarised light	Diffuse reflection
Range	20m (max)	0.03 to 7m*	1m (max)**
Light Source	Red LED (700nm)	Red LED (700nm)	Infrared LED (880nm)
Power supply	24 to 240Vac/dc ± 10% 50/60Hz
Power consumption	Tx: 1.5W Rx: 2W	2W
Operating mode	Light-on Dark-on Selectable
Output	Relay SPST (3A @ 250Vac 750VA / 3A @ 30Vdc 90W)
Response time	10mS max.
Max. ambient light	10,000lux
LED indicator	operation (RED)
Sensitivity Adj.	None		By potentiometer
Operating temp.	-25°C to +55°C
Humidity	Withstands 85% RH
Case Protection	IP66
Connection	Via screw terminals (Connector Adaptor Option)
Timing functions (F)	Delay on make, delay on break, one shot, no timer, switch selectable
Timing ranges (F)	0.1 to 5 seconds
Case material	Lens & cover: acrylic, Case: Heat resistant ABS
Using supplied K7 reflector *Using 200m x 200m white paper

DL-S Series

Background suppression by optical focusing
Detects objects of any colour, material or shape against a similar background
Powerful beam for good operation even in dirty object, dirty lens conditions
Relay or solid state output options
Adjustable range

	DL-S100 ~	0.2m to 1m
	DL-S200 ~	0.2 to 2m
	DL-7050 ~	150mm to 600mm

IP66 Sealed

TECHNICAL DATA
Type	DLS100P	DLS200P	DL7050	DLS100TC	DLS200TC
Detection	Convergent reflection
Adjustable Range	0.2 – 1m	0.2 – 2m	150mm – 600mm	0.2 – 1m	0.2 – 2m
Power Supply	24V – 240V AC/DC ± 10% 50/60HZ			12 – 24V DC ± 10%, 10% Max ripple


Current Consumption	30mA (max) AC, 4W (max) DC			50mA Max

Output Rating	Relay (3A, 250VAC 750VA); (3A, 30VDC 90W)			NPN/PNP Open collector; 100mA, 30VDC Max)
Operating Mode	Light on – Dark on selectable
Response Time	20ms (Max)			2ms light on 5ms light off
Light Source	Red LED (880nm)
Sensing Cell	Half dividing photodiode
LED IND.	Output = red LED Stability = green LED
Range	Adjustable Mechanically
Protection	–			Short Circuit
Housing	Polycarbonate/Acrylic sealed to IP66
Connection	Screw Terminals
Ambient Light	10,000 Lux (Max)
Operating Temp	-25°C to +55°C

J Series Industrial

Slim bodied side ways looking
Quick change senor head
Multivoltage 24-240 VAC/DC (Relay models)
Polarised lenses to eliminate false triggering
Housing sealed to IP66
Multifunction timer (0.1-10Sec) F-versions

SPECIFICATIONS
Type No.	JT10R/JT10RF	JRM3R/JRM3RF	JR07/JR07F	JNT10R	JNRM3R	JNR05
Function	Throughbeam	Retro-reflective	Diffused	Throughbeam	Retro-reflective	Diffused
Range	10m	0.03 to 3m*	500mm	10m	0.03 to 3m*	500mm
Light source	Red LED	Red LED	Infrared LED	Red LED	Red LED	Infrared LED
Power supply	24V to 240V AC/DC			12V to 24V DC ± 10%, max ripple 10%
Power consumption	2 VA			23mA (max)	23mA (max)	25mA (max)
Operating mode	Light-on or Dark-on selectable
Output	Relay SPST, N/O 250V AC, 2A, 125VA resistive load 220VDC, 2A, 60w resistive load			PNP/NPN (2 outputs) open collector 100mA 20VDC short circuit protected
Response time	5mS (max)			0.5mS (max)
Max amb. light	10,000 lux
LED indicators	Red LED – operation indicator, Green LED – stability indicator			Red LED – operation indicator, Green LED – stability indicator
Sensitivity adj.	None	None	Potentiometer	None	None	Potentiometer
Timing functions**	Delay on make, delay on break, single shot or no time delay			Not applicable
Timing ranges**	By potentiometer adjustment 0.1 to 1sec or 1sec to 10sec			Not applicable
Temp. range	-25°C to +55°C
Case protection	IP66 (IEC) protection against dust & low jets of water
Case material	Acrylic
Assembly & connection	Plug in sensing head to base – screw terminal wiring in base
* K7 Reflector used **F-versions only

CX Series M18 Barrel Type DC

Short body
Flat lens
Easy mounting
Housing sealed to IP66
LED indication
Plug in types available (J-suffix)

SPECIFICATIONS
Type No.		CX-M2RD	CXR01	CXRO3V	Power Supply: 12 – 24VDC ± 10% Control output: PNP or NPN, 100mA at max 30VDC short circuit protected Response time: 0.35mS max Ambient light: max 10000 lux Indication: Red LED when output is activated Temperature range: -25°C to +55°C Housing: Polycarbonate sealed to IP66 Connection: 3 x 0.2mm² flying lead length 2m or connector (-J version)
Function		Polarised Retro Reflective	Diffuse	Diffuse Adjustable
Range		2m*	100mm**	300mm***
Current Composition	NPN	18mA	17mA	20mA
	PNP	24mA	23mA	26mA
Operating Mode		Dark on	Light on
Light Source Wavelength		Red LED 700nm	Infrared LED 950nm
Material		Lens: Acrylic; Body: Polycarbonate	Body + Lens Polycarbonate
With included K7 reflector Using 50 x 50mm white paper, range will vary depending on target size and surface **Using 100 x 100mm white paper, range will vary depending on target size and surface.

CX Series M18 Barrel Type AC

2-wire 90 – 260VAC
Flat polarised lens (R-version)
LED indication
Easy mounting
Housing sealed to IP66
Plug in type avaialable (J-suffix)

SPECIFICATIONS
Type No.	CXM1RDTW (J)	CXM2DTW(J)	CXS01TW(J)	Power supply: 90 – 260VAC Output mode: 2 wire 7 – 200mA Residual voltage: 10V Current consumption: 1.5mA (max) Response time: 30ms (max) Indication: Red LED when output is activated Ambient light: max 5000 lux Temperature range: -25°C to +55°C Housing: Polycarbonate sealed to IP66 Connection: 4mm dimeter 2 wire 2m long or by connector (-J version)
Function	Retro-reflective Polarised	Retro-reflective	Diffused
Range	min 1m*	min 2m	100mm**
Operation Mode	Dark on		Light on
Lens	Acrylic	Polycarbonate	Acrylic
Light source	Red LED	Infrared LED	Red LED
With included K7 reflector *Using 50 x 50mm white paper, range will vary depending on target size and surface

Mini G Series

Sub miniature 10.3 x 15 x 25.4mm
Housing sealed to IP67
Light On/ Dark On selectable
Long range (up to 7m) throughbeam
Brackets, reflector & pinhole masks supplied (where applicable)
Response time 0.35ms
Stability output (only NPN types)

TECHNICAL DATA
Models	Basic	GT1	GT3	–	–	–	GS5	–	GS20	–	–
	Side-On	GT1S	–	GT3RS	GT7S	GSM2RS	GS5S	GS20RS	GS20S	GSZ3S	GSZ3RS
Function		Throughbeam				Retro-ref	Diffuse reflection			Convergent beam
Range		1m	3m	5m	7m	2m*	5cm	20cm	30cm	40mm	30mm
Target		–					5 x 5cm W paper	10cm x 10cm White paper
Object Resolution		Ø6mm (min)					–
Light Source Wavelength		Infrared LED 95nm		Red LED 700nm	Infrared LED 900nm	Red LED 600nm	Infrared LED 950nm	Red LED 700nm	Infrared LED 900nm		Red LED 660nm
Lens Material		Polycarbonate	Polyarylate				Polycarbonate	Polyarylate		Polycarbonate	Acrylic
*Using included K71 reflector. Range can be extended to 4m by using K7 reflector.

Midi G Series

Miniature 11.5 x 20 x 36mm
Polaraised lens
Housing sealed to IP67
Light On/Dark On switchable
Response time 0.5ms
Brackets and reflector included
Cabled or Connector types

SPECIFICATIONS
Type No.	Side On	GT5RS	GMR2RS	GMR2RS-NF	GSRO5RS
	Basic	GT5R	GMR2R	–	GSRO5R
Function		Throughbeam	Polarised Retro-reflective	Retro-reflective	Diffused
Range		7m	1.5m*	4m**	0.5m***
Response Time		<0.5ms
Current Consumption		Transmitter 20mA; Receiver 15mA	<35mA
Hysteresis		–	–		Maximum 10%
Light source: Red LED (700nm) Power supply: 12-24VDC ± 10%, max ripple 10% Output: 100mA at 30VDC max Max. ambient light: 5,000 lux Indication: Throughbeam; Transmitter: power on – red LED, Receiver: detection – red LED, stability – green LED Diffuse & Retro-reflective; Detection-red LED, stability – green LED Sensitivity adjustment: Poteniometer Temp. range: -25°C to +55°C Protection: IP67 Housing: Polycarbonate Connection: Flying lead 3 x 0.5mm², 2m long (Transmitter 2 x 0.5mm², 2m long) or M8 4 Pin Connector
* Using K-71 reflector (0.03 – 2.5m with K-7 reflector) Using K-71 reflector (0.03 – 6m using K-7 reflector) * Using 100 x 100 white paper.

UM-Series

Ultra Miniature size. Three types

i 19.5 x 18 x 3.5mm

ii 20 x 9 x 7mm

iii 18 x 12.5 x 3.5mm

Throughbeam, diffuse or convergent beam
Sensitivity adjustment option
Response time 0.5ms
IP64 sealed
80mA, open collector output
Short circuit protected

TECHNICAL SPECIFICATIONS V-Suffix models = Adjustable sensitivity
Type		UMT15DT	UM T15DTV	UMT50DT	UMT50DTV	UM T50DS	UM R3T	UM R3TV	UM R5T	UM R5TV	UM Z3SV
Function		Throughbeam					Diffuse				Convergent
Range (max)		15cm		50cm			3cm#1		5cm#1		3cm
Object Res.		Ø3mm (min) Opaque object					–
Power Supply		24VDC ± 10% Max ripple #2					12V to 24VDC ± 10% max ripple
Current Cons.	TRNS	15mA					20mA	27mA	20mA	27mA	27mA
	RCVR	15mA	22mA	15mA	22mA	15mA
Output		NPN or PNP, 80mA, 30VDC (max) Open collector
Operating Mode		Dark On					Light On
Response Time		0.5ms (max)
Light Source		Red LED (660nm)
Indication		Red LED: Activated output, Green LED: Stability
Sensitivity Adjustment		–	Yes	–	Yes	–	–	Yes	–	Yes	Yes
Connection		Transmitter: 0.3mm² x 2 (2m Black) Receiver: 0.3mm² x 3 (2m Grey)					0.3mm² x 3 (2m Black)
Ambient Light		3,000 Lux (Maximum
Operating Temp.		-25°C to +55°C
Protection		IP64
#1 – 5 x 5cm White Paper #2 – 12VDC Type available

Mini-DL Series

Close range background suppression
Detects objects of any colour, size or shape, but ignores background
Light On/Dark On switchable
Response time 0.35mS
IP67 sealed
NPN or PNP types available

TECHNICAL SPECIFICATION
Type No.	DL-55-NPN/PNP	DL-S5R-NPN/PNP	DL-S10R-NPN/PNP	DL-S20-NPN/PNP	GR100R-NPN
Detection method	Convergent beam				Colour mark
Range	50mm*	50mm*	100mm**	200mm**	100mm
Power supply	12 – 24VDC +/- 10% Max ripple 10%
Current cons	27mA max		30mA max		25mA max
Operating mode	Light on/Dark on selectable by switch
Output rating	NPN/PNP open collector 100mA at 30VDC***
Alarm rating	NPN/PNP open collector 50mA at 30VDC***
Protection	short circuit protection (output only)
Response time	0.35msec
Light source	Infra red LED (880nm)	Red LED (700nm)	Red LED (700nm)	Infra red LED (880nm)	Red LED (700nm)
LED indication	Output red LED; Stability green LED
Sensitivity adjustment	By potentiometer
Housing	Polycarbonate sealed to IP67
Cable	4 x 0.15mm, 2m long, Ø 3mm		4 x 0.2mm, 2m long, Ø 4mm
Ambient light	5000 lux max				3000 lux max
Operating temp.	-25 to +55 deg C				-10 to +55 deg C
Humidity	Withstands 85% RH
50 x 50mm white paper with sensitivity set to max 100 x 100mm white paper with sensitivity set to max ** PNP types do not have stability output. GR100R is only available in NPN output

F1 Series Fibre Optic Amplifier

Response time 0.5ms
0.03mm minimum object size detection (Using F1R + FR510)
4 turn potentiometer for accurate adjustment (3 LED setting)
Light On/Dark On slectable
NPN or PNP types available
Output pulse can be extended by 50ms (Switchable)
Alarm output for weak switching levels and power loss
Mounting by DIN rail or bracket
Wide selection of available fibres

TECHNICAL DATA
Type No.	F1-NPN/PNP	F1R-NPN/PNP	F1G-NPN/PNP
Light source (Wavelength)	Infra red LED (950nm)	Red LED (660nm)	Green LED (570nm)
Power supply	12V to 24VDC ± 10% max ripple 10%
Current cons.	35mA max
Operating mode	Light on – dark on selectable. Selectable 50ms output extension
Output	NPN/PNP 100mA at 30VDC open collector
Alarm output	NPN/PNP 100mA at 30VDC open collector
Protection	Short circuit on normal output. No protection on alarm output
Response time	0.5ms (max)
Ambient light	3,000 lux maximum
LED indication	3 LED system (Green, red, yellow)
Sensitivity	Set by 4 turn potentiometer
Operating temperature	-25°C to +55°C
Humidity	Withstands 85% RH
Housing	ABS plastic sealed to IP40
Cable	4 x 0.2mm² 2m long

F1 Series High Speed, High Power, Analogue

Response time 30µs (FIRH type)
Range X2 FIR (FIRM type)
NPN or PNP types available
Analogue 1-8v output (FIR-AN type)
4 turn potentiometer for easy setting

TECHNICAL SPECIFICATION
Type No.	F1RH-NPN/PNP	F1RM-NPN/PNP	F1R-AN
Light source	Red LED 660nm	Red LED 660nm	Red LED 660nm
Power supply	12 to 24VDC ± 10; max ripple 10%		12 to 24VDC ± 5%; max ripple 2%
Current cons.	30mA max	25mA max	30mA max
Operating Mode	Light on – Dark on switch selectable; 50msec off delay option selectable		Voltage output proportional to received light
Output	NPN/pnp 100mA at 30VDC open collector		Voltage 1 – 8VDC
Protection	Short circuit protection		–
Response time	30µsec	250µsec	–
Ambient light	3000 lux maximum		10000 lux maximum
LED indication	Output red LED; Stability green LED		Red LED to indicate amount of light received
Sensitivity	Set by 4 turn potentiometer
Operating temperature	-25 to +55 deg C		-10 to +55 deg C
Humidity	Withstands 85% RH
Housing	ABS plastic sealed to IP40
Cable	3 x 0.3mm²; 2m long

F2 Series Fibre Optic Amplifier

Unique compact design
Response time 0.5ms
0.03mm minimum object size detection
IP65 sealed
Senstivity adjustment (Dual LED setting)
Light On/Dark On selectable
NPN or PNP types available
Mounting by screws or DIN rail
Wide selection of available fibres
Choice of connector or flying types

TECHNICAL DATA
Type No.	All Types
Light source (Wavelength)	Red visible light (660nm)
Power supply	12V to 24VDC ± 10% max ripple 10%
Current cons.	25mA max
Operating mode	Light on – Dark on selectable
Output	NPN or PNP Open Collector: 100mA 30VDC max
Response time	0.5ms
Ambient light	3,000 lux maximum
LED indication	Red LED – detection, Green LED – stability
Sensitivity	Set by potentiometer
Operating temp.	-25°C to +55°C
Housing	ABS plastic sealed to IP65
Connection	By flying lead 3 x 0.2mm² x 2m or by connector

F10-"Touch to Teach" Fibre Amplifier

Easy "touch to teach" setting
Automatic sensitivity setting
Moving target setup
Remote setting possible
Accurate alignment with feedback system
Self diagnostic output

SPECIFICATIONS
Type No.	F10R	F10G	F10B
Detection	Throughbeam or diffuse reflection
Power supply	12 – 24VDC ± 10% max. ripple
Current consumption	50mA max.
Operating mode	Light on/dark on selectable
Response time	0.5mS
Output rating	NPN/PNP 100mA at 40VDC open collector
Alarm output	NPN/PNP 50mA at 40VDC open collector
External input	contact or solid state
Light source	Red LED	Green LED	Blue LED
LED indication	Full indication of light level received
Sensitivity adjustment	Auto-teach or manual
Mode switch	Auto, set, run, sensitivity, hysteresis (refer to manual)
Timer switch	Selectable timer funct. (off delay 50mS)
D-on/L-on switch	Dark-on/light-on selectable
Protection	Short circuit protection
Tamper protection	Sensor can be locked in "run" mode
Housing	ABS resin with polycarbonate cover. Sealed to IP66
Cable	5 x 0.2mm² 2m long
Operating temperature	-25 to +55 deg C
Humidity	Withstands 85%RH

MC-Series

Registration mark and label detection
Wide detection range of colours and materials
IP67 Sealed (suitable for washdown environments)
Green, red or blue visible light used for optimum performance
Light On/Dark On operation
NPN or PNP output
LED indication of output and stability
Glass lenses for high resistance to wear

SPECIFICATIONS
Type No.	MCU2RTC	MCU2GTC	MCU2BTC
Detection	Throughbeam slot sensor
Range	2mm Fixed
Power supply	12 – 24VDC ± 10% max. ripple
Current consumption	22mA max.	30mA max.	24mA max.
Output rating	Open collector NPN/PNP twin output 100mA, 30VDC max.
Operating mode	Light on/dark on selectable
Response time	0.5mS max.
Light source	Red LED	Green LED	Blue LED
LED indication	Output = red LED; Stability = green LED
Sensitivity adjustment	By four turn potentiometer and high/low power switch
Protection	Short circuit protection
Housing	ABS resin casing with glass lenses sealed to IP67
Connection	Flying lead 0.2mm² x 4 core, 3m long black
Ambient light	5,000 lux max.
Operating temperature	-25 to +55 deg C
Humidity	Withstands 85% RH

MA Series Colour Mark Sensor

Touch to teach setting
External teach function
Wide detection range of colours and materials
Red Blue Green visible light source available
Light-on/Dark-on operation selectable
Protected to IP67

SPECIFICATIONS
Type No.	MA-U2R	MA-U2G	MA-U2B
Detection	Throughbeam slot sensor
Range	2mm Fixed
Power supply	12 – 24VDC ± 10% max. ripple
Current consumption	35mA
Output rating	NPN Open collector output 100mA, 30VDC max.
Operating mode	Light on/dark on selectable
External teaching	None voltage input(Contact or None-contact)
Response time	0.7mS max.
Light source	Red LED(660nm)	Green LED(570nm)	Blue LED(450nm)
LED indication	Light Indicator orange LED; Stability = green LED
Materials	Case - heatproof ABS to IP67, Lens Glass
Connection	Flying lead 0.2mm² x 4 core, 3m long black
Ambient light	5,000 lux max.
Operating temperature	-25 to +55 deg C
Humidity	Withstands 85% RH
Weight	120g
Vibration	10Hz-55Hz in 3 directions , 1.5mm amplitude

CS-C3 Colour Sensor

Recognition of up to three colours
Easy "touch to teach" operation
Shade differentiation of any colour
High speed operation (1ms response time)
Easy installation of fibre optic sensing head
Power supply: 12V – 24VDC
Outputs: 4 x 100mA NPN open collector (PNP type available)
Small sensing head

SPECIFICATIONS
AMPLIFIER
Type No.	CS-C3
Detection	Diffuse RGB spectrum measurement
Power supply	12 – 24VDC ± 105, 10% max ripple
Power consumption	18W max
Output rating	Open collector NPN, 100mA, 30VDC max
Response time	1mS
Light source	Halogen lamp 5V, 9W
Detecting colour	3-colour selection system (RGB)
Background colour	1-colour selection system
Distinguishing factor	Colour/colour + Y selectable
Distinguishing band	Rough/fine selectable
Timer	Normal/off-Delay (50ms)
LED indication	Colour output indicator: 3 x orange; NG output indicator: 1 x red; Mode indicator: 3 x orange
Protection	Short circuit protection
Lamp fault alarm	Indicator and buzzer
Housing	Sealed to IP20
Cable	Flying lead 2m long, black
Operating temp.	-10 to +40 deg C
Humidity	Withstands 85% RH

FIBRE UNITS
Type No.	CS-FV5	CS-FV30
Range	5mm ± 1mm	30mm ± 3mm
Spot diameter	1mm	3.5mm
Fibre length	1 metre
Fibre material	Plastic
Bending radius	50mm
Ambient light	1,000 lux max.
Operating temp.	-25 to +55 deg C
Humidity	Withstands 85% RH
Housing	IP40

CS-D3 Series Colour Sensor

Auto Set Colour Sensor
Three Programmable Settings
Choice of fibres
Colour and Brightness Discrimination
Fast Response Times

SPECIFICATIONS
AMPLIFIER
Type No.	CS-D3
Detection method	Time sharing spectrum measurement by red/green/blue LED
Detection range/spot	Depending on fibre unit
Power supply	12 – 24VDC ± 105, 10% max ripple
Power consumption	1.6W max
Response time	Normal mode (NML):1msec or less Avge value mode (AVM): 5msec or less
Tolerance range	9 degrees
Teaching	Auto(AUT)/Manual(MAN)/Mix(MiX)
Timer	Non(NON)/Off-delay(OFD) Approx 50msec
Light source	Red/Green/Blue LED
Timer	Normal/off-Delay (50ms)
Circuit Protection	Short circuit/Reverse connection of power supply built-in
Protection	IP65(with fibre unit attached)
Materials	Case: Heat-proof ABS, Cover: Polycarbonate
Connection	Lead wire(outer dia 4.5) 0,2sqx4core 2m length
Operating temp.	-10 to +55 deg C
Humidity	Withstands 85% RH

FIBRE UNITS
Type No.	CS-DF10	CS-DF30
Range	13mm (10-16mm)	33mm(28-38mm)
Spot diameter	3mm or less	5mm or less
Fibre length	2 metre
Bending radius	25mm or more
Ambient light	Receiver Incandescent light 5,000lx or less Sunlight 10,000lx or less
Operating temp.	-25 to +55 deg C
Humidity	Withstands 85% RH
Housing	IP54
Weight	40g	50g

SST800 Series "Cross Ray" Sensors

Detection height 50mm, 100mm and 150mm

Detection width:

SST810 / SST850 ~ 150 to 800mm

SST830 ~ 0.5 to 2.5m

SST803 ~ 150 to 1000mm

Unique beam pattern
100mA 30VDC NPN open collector output
12 – 24VDC supply voltage

TECHNICAL DATA
Type No.	SST803	SST810	SST830	SST850
Range	150-1000mm	150-800mm	0.5-2.5m	150-800mm
Minimum object	Ø15mm	Ø11mm	Ø13mm	Ø17mm
Detection height	50mm	100mm	100mm	150mm
Response time	4msec max	8msec max
Axis pitch	12.5mm	11mm		16.6mm
Light source	Infrared LED x 5	Infrared LED x 10
Power supply	12 to 24VDC ± 10% max ripple 10%
Current consumption	Trans: 45mA max; Rec: 45MA max	Transmitter: 80mA max.; Receiver: 80mA max.
Output	100mA 30VDC NPN open collector; Short circuit protected
Output function	Normally closed
LED indication	Transmitter: Green LED power on; Receiver: Green LED power on; Red LED output on
Ambient light	5000 lux maximum
Housing	Aluminium/ABS plastic protected to IP40
Temp. range	-25°C to +55°C
Connection	Transmitter: 2 x 0.3mm² x 3m grey; Receiver: 3 x 0.3mm² x 3m black
Permissible misalignment	Vertical: ± 10mm; Horizontal: ± 30mm

SS-20 Series – Wide Sensor

Ultra slim package
Up to 7m scan range
Small object resolution (32mm)
IP66 sealed
LED indication of power on, output switched and stability
Large selection of detecting widths

SPECIFICATIONS
Type No.</

SST810 / SST850 ~	150 to 800mm
SST830 ~	0.5 to 2.5m
SST803 ~	150 to 1000mm