Shared Features of the 9400, 3300 & 9300 controllers

• Full PID autotuning temperature controllers
• Bright LED displays
• Dual-outputs
• Alarms with 5 options
• PID heat-cool operation
• Ramp & soak operation

• Sleeve mounting for easy maintenance
• IP66 protection from front panel
• CE, UL & CSA approvals
• 3-year warranty
• Charting and logging software option
• RS232/485 Modbus option

3300 controller

1/32nd DIN 24 x 48mm
Options:
ssd & relay as standard
3311 - 2 x relay
3322 - 2 x ssd
12-24V on 3300 & 3322
RS232 module
RS485 module

9300 controller

1/16th DIN 48 x 48mm
Options:
ssd & relay as standard
9311 - 2 x relay
9322 - 2 x ssd
12-24V on 9300 & 9322
RS232 module
RS485 module

Specifications (for all 3300, 9300 & 9400 products)

Thermocouple
9 types
Standards: IPTS/68/DIN 43710
CJC rejection: 20:1 (0.05°/°C) typical
External resistance: 100W maximum
Resistance thermometer
RTD-2/Pt100 2 wire
Standards: DIN 43760
(100W 0°C/138.5W 100°C Pt)
Bulb current: 0.2mA maximum
Linear process inputs
mV range: 0 to 50mV
Applicable to all inputs SM = sensor maximum
Calibration accuracy: ±0.25%SM ±1°C
Sampling frequency: input 10Hz, CJC 2 sec.
Common mode rejection: Negligible effect up to 140dB, 240V, 50-60Hz
Series mode rejection: 60dB, 50-60Hz
Temperature coefficient: 150ppm/°C SM
Reference conditions: 22°C ±2°C, rated voltage after 15
minutes settling time.

Output devices
SSd/SSd1/SSd2: solid state relay driver: To switch a
remote SSR 5Vdc +0/-15% 15mA non-isolated
Miniature power relay: form A/SPST contacts (AgCdO) rLY and rLY1: 2A/250ac resistive load
rLY2: 1A/250ac resistive load

General
Displays: Upper, 4 Digits, high brightness green LED. 10mm (0.4") high.
Lower, 4 Digits, Orange LED. 9mm (0.35") high (9400 only)
Digital range -199 to 9999
Hi-res mode -199.9 to 999.9
LED output indicators - flashing SP1 square, green; SP2 round, red
Keypad: 3 elastomeric buttons

Environmental
Humidity: Max 80%
Altitude: up to 2000M
Installation: Categories ll and lll
Pollution: Degree ll
Protection: NEMA 4X, lP66
EMC emission: EN50081-1 FCC Rules 15 subpart J
Class A
EMC immunity: EN50082-2
Ambient: 0-50ºC (32-130°F)
Mouldings: flame retardant polycarbonate
Weight: 130g (4.2 oz)

• Full PID autotuning process controller
• 4-20mA input and output
• Total of 3 outputs, from 4-20mA, SSR drive, relay
• Input options:
  4-20mA
  Thermocouple
  2 or 3 wire PT100
  0-50mV, 0-5, 0-10V
• Alarms with 5 options
• PID heat-cool operation
• Ramp & soak operation
• Sleeve mounting for easy maintenance
• IP66 protection from front panel
• CE, UL & CSA approvals
• 3-year warranty
• Charting and logging software option
• RS232/485 Modbus option

Features of the 9500P (programmer)

• Up to 31 programs (profiles)
• Up to 126 segments
• Unlimited use of event outputs via the 2nd and 3rd outputs
• Copy/paste/edit/delete functions to simplify program building
• Call another program as a sub-program segment
• Up to 999 program loop cycles, or continuous loop cycling
• Hold back function to ensure the next segment is not started until the last segment reaches set-point
• 3 power fail recovery options, (hold, continue or reset)
• Front Panel Interrogation of the program position
• Memory usage indication during programming
• Front panel 'release from hold' function to run the program.

Click to download Demo (5.45Mb Win95/NT)

Contact us for more info

CALCOMMSTcharting, logging and configuration software

Charting and logging software from controller to PC

• Windows NT or 95 based
• Easy installation
• Data-log up to 128 controllers
• No training necessary
• Up to 10 x 12 trace chart-recorders
• Software alarms
• Instrument cloning for easy programming
• Recipe/profile save and recall
• Remote set-point adjustment

All you need is a PC, with RS232 or RS485 capability, a cable for the same and a number of CAL controllers fitted with the comm's modules, install CALCOMMST on to your PC and get going.